Engineered for demanding environments, this M14 x 149mm brass hex head cap screw offers superior corrosion resistance and electrical conductivity. Its robust design ensures reliable fastening in challenging industrial applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M14 |
| Length | 149mm |
| Head Width | 14mm |
A proven choice for industrial professionals, this M14 x 149mm brass hex head cap screw is manufactured from high-grade brass, offering exceptional resistance to corrosion, especially in marine, chemical, and humid environments. The metric M14 thread provides a secure and precise fit, while the 149mm length allows for substantial material grip. With a head width of 14mm, it is compatible with standard tooling for efficient installation. Brass's inherent non-magnetic properties and good electrical conductivity also make it suitable for sensitive electrical assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-thread the screw to confirm proper engagement and alignment. 3. Tighten the screw to the specified torque using a calibrated wrench, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during tightening, which can strip the threads or damage the fastener. | Always consult torque specifications for the application and use a calibrated torque wrench for accurate tensioning. |
| Mismatched thread sizes or pitches leading to improper fit and potential failure. | Verify that the M14 thread size and pitch of the cap screw precisely match the receiving hole or nut. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and equipment, Electrical enclosures and connectors, Plumbing and fluid handling systems, Decorative and architectural applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||