Engineered for demanding environments, this M14 x 148mm Nylon Hex Head Cap Screw provides a reliable, lightweight fastening solution. Its robust polymer construction ensures excellent chemical and corrosion resistance.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M14 |
| Length | 148mm |
| Head Width | 24mm |
Specified by design engineers worldwide, this M14 x 148mm Nylon Hex Head Cap Screw is manufactured from high-performance polyamide, offering superior dielectric strength and resistance to a broad spectrum of chemicals. The M14 thread provides a secure mechanical connection suitable for light-duty applications where corrosion or electrical conductivity is a concern. The 148mm length and 24mm head width ensure adequate bearing surface and torque application for its intended use in environments such as marine, chemical processing, and electrical assembly.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Hand-thread the cap screw into the receiving component to avoid cross-threading. 3. Tighten using an appropriately sized wrench or socket to the recommended torque specification for nylon fasteners, avoiding over-tightening which can strip threads or damage the fastener.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening nylon fasteners | Use a torque wrench set to a low value, or tighten until snug and then a quarter turn. Over-tightening can strip threads or crack the fastener. |
| Using nylon fasteners in high-stress applications | Nylon fasteners are generally for light-duty, non-structural applications. Consult engineering specifications for load-bearing requirements and consider metal alternatives if necessary. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and equipment mounting, Marine and offshore equipment, Chemical processing equipment assembly, Lightweight structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||