This M14 x 137mm brass hex head cap screw offers superior corrosion resistance and excellent conductivity, making it ideal for demanding industrial environments. Its robust construction ensures reliable fastening for critical applications.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Size | M14 |
| Length | 137mm |
| Head Width | 10mm |
A high-performance industrial component, this M14 x 137mm brass hex head cap screw is engineered for demanding applications requiring excellent corrosion resistance and electrical conductivity. Manufactured from high-grade brass, it exhibits a tensile strength suitable for moderate load-bearing tasks. The M14 thread form ensures secure engagement with M14 nuts or tapped holes, while the 137mm length provides ample reach for joining thicker materials. The 10mm hex head width offers a substantial gripping surface for standard tooling, facilitating consistent torque application and preventing damage during installation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads (nut or tapped hole) are clean and free from debris. 2. Align the cap screw with the pre-drilled hole or nut. 3. Engage the threads by hand for at least two full turns to prevent cross-threading. 4. Tighten the cap screw using an appropriate wrench or socket to the recommended torque specification, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Cross-threading the screw by forcing it into misaligned threads. | Always start threading by hand for several turns to confirm alignment before using tools. |
| Overtightening the brass screw, which can lead to thread stripping or deformation. | Refer to torque charts for brass fasteners or use a torque wrench to achieve the specified tightness. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Electrical connectors and enclosures, Food processing equipment, Corrosive chemical environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||