This M14 x 128mm Nylon Hex Head Cap Screw offers superior corrosion resistance and lightweight properties. Engineered for reliable fastening in demanding environments, it's an excellent choice for electrical insulation and non-conductive applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Size | M14 |
| Length | 128mm |
| Head Width | 31mm |
Built to exacting engineering tolerances, this M14 x 128mm Hex Head Cap Screw is manufactured from high-strength Nylon, offering excellent resistance to chemicals, corrosion, and moisture. Its dielectric properties make it ideal for electrical applications, preventing short circuits. The M14 thread size ensures robust mechanical engagement, while the 128mm length provides substantial reach for various assembly needs. The 31mm head width allows for ample torque application with standard tooling, ensuring secure fastening without compromising material integrity. Its low coefficient of friction also aids in ease of installation and removal.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating components are clean and free of debris. 2. Insert the M14 x 128mm Nylon Hex Head Cap Screw into the pre-drilled or tapped hole. 3. Tighten using a suitable wrench or socket, applying consistent torque as specified by the application requirements, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, which can strip threads or fracture the head. | Use a torque wrench and adhere to the recommended torque specifications for nylon fasteners. |
| Using in applications requiring high tensile strength or load-bearing capacity beyond nylon's capabilities. | Select fasteners with appropriate material properties (e.g., steel) for high-stress applications. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and equipment, Corrosive environments (chemical processing, marine), Lightweight assemblies and instrumentation.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||