This M14 x 125mm Hex Head Cap Screw, constructed from robust polycarbonate, offers exceptional impact resistance and chemical inertness. Ideal for applications requiring lightweight yet strong fastening solutions.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M14 |
| Length | 125mm |
| Head Width | 10mm |
Trusted by engineers across multiple sectors, this M14 x 125mm Hex Head Cap Screw features a nominal thread diameter of 14mm and a total length of 125mm. The head width is precisely 10mm. Manufactured from high-performance polycarbonate, it delivers superior dielectric strength, excellent UV resistance, and a wide operating temperature range, making it a preferred choice for corrosive environments and applications where non-conductivity is paramount. Its inherent toughness ensures reliable performance in demanding assembly processes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free from debris. 2. Hand-thread the screw into the receiving component until snug. 3. Use an appropriate-sized wrench to tighten the screw to the specified torque, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the polycarbonate screw. | Use a torque wrench and adhere to recommended torque values for polycarbonate fasteners to prevent stripping or cracking. |
| Using the screw in applications exceeding its chemical compatibility limits. | Consult a chemical resistance chart for polycarbonate before use in aggressive chemical environments. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and equipment mounting, Medical device assembly, Corrosion-resistant industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||