High-strength M14 x 113mm hex head cap screw, precision-molded from advanced polycarbonate. Offers exceptional chemical resistance and electrical insulation for specialized assembly needs.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Size | M14 |
| Length | 113mm |
| Head Width | 36mm |
Manufactured under strict quality controls, this M14 x 113mm hex head cap screw features a substantial 36mm head width for optimal torque application. Constructed from high-performance polycarbonate, it exhibits superior resistance to a wide range of chemicals, including acids, bases, and solvents, making it ideal for corrosive environments. Its non-conductive nature provides excellent electrical insulation properties, crucial for applications involving sensitive electronics or potential electrical hazards. The material's inherent toughness and impact resistance ensure reliable performance under moderate stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Insert the polycarbonate hex head cap screw and engage threads by hand for the initial turns. 3. Tighten using a suitable wrench or socket, applying torque incrementally to avoid overstressing the polycarbonate material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, which can lead to thread stripping or material fracture. | Apply torque carefully and consult material specifications for recommended torque limits. Use a torque wrench for precise control. |
| Using the screw in applications exceeding its temperature or load-bearing capabilities. | Verify the environmental conditions and anticipated loads against the polycarbonate's material properties. Consult datasheets for temperature and strength limitations. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Chemical processing equipment assembly, Electrical enclosure fastening, Corrosion-resistant instrumentation mounting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||