This M14 x 101mm hex head cap screw, crafted from high-grade 304 stainless steel, offers superior corrosion resistance and tensile strength for critical structural and mechanical assemblies.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M14 |
| Length | 101mm |
| Head Width | 19mm |
A proven choice for industrial professionals, this M14 x 101mm hex head cap screw is manufactured from robust 304 stainless steel, renowned for its excellent resistance to corrosion and moderate strength properties. The metric thread size ensures compatibility with standardized components. Featuring a nominal diameter of M14 and a substantial length of 101mm, this fastener provides deep engagement for secure connections. The hex head, with a 19mm width across flats, allows for high torque application using standard wrenches or sockets, ensuring a reliable and steadfast joint in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Select the appropriate size wrench or socket for the 19mm hex head. 3. Apply steady, even torque to tighten the screw until the desired clamping force is achieved.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size wrench, leading to head stripping. | Always use a wrench or socket that precisely fits the 19mm hex head. |
| Over-tightening, which can damage the threads or the workpiece. | Tighten to the manufacturer's recommended torque specification or until snug, avoiding excessive force. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Structural steel assembly, Machinery and equipment fabrication, Marine and outdoor installations.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||