This M14 x 10mm Nylon Hex Head Cap Screw offers a lightweight, corrosion-resistant fastening solution. Ideal for applications requiring electrical insulation and resistance to mild chemicals.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Size | M14 |
| Length | 10mm |
| Head Width | 17mm |
Engineered for reliability and performance, this M14 Hex Head Cap Screw is fabricated from high-grade nylon, providing excellent dielectric strength and resistance to a wide range of chemicals. Its M14 thread size ensures compatibility with standard M14 nuts and tapped holes. The 10mm length is optimized for shallow assembly depths, while the 17mm head width provides adequate bearing surface for secure tightening without over-torquing. This material choice makes it suitable for environments where metal fasteners may corrode or conduct electricity, such as in electronic assemblies or marine applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Hand-thread the M14 Nylon Hex Head Cap Screw into the receiving hole or nut to the desired depth. 3. Use a wrench or socket of the appropriate size (17mm) to tighten the screw until snug, avoiding excessive force to prevent thread stripping or material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M14 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M14 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw | Tighten only until snug. Nylon is less tolerant to high torque than metal and can strip or deform. |
| Using in high-temperature or high-load applications | Nylon has lower temperature and load-bearing limits than most metals. Select appropriate fastener material for the application's demands. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures, Marine hardware, Light-duty machine assembly.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||