This M13x98mm Hex Head Cap Screw, forged from high-grade 304 stainless steel, offers superior corrosion resistance and mechanical strength for critical fastening applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M13 |
| Length | 98mm |
| Head Width | 30mm |
Manufactured under strict quality controls, this M13x98mm hex head cap screw is constructed from premium 304 stainless steel, renowned for its excellent tensile strength, ductility, and resistance to rust and corrosion in diverse environmental conditions. The 30mm head width ensures substantial bearing surface and facilitates precise torque application with standard tooling. Its robust design makes it suitable for high-stress industrial assemblies, marine environments, and outdoor applications where long-term reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate tool (e.g., socket wrench) that matches the 30mm hex head width. 2. Align the screw with the pre-drilled or tapped hole, ensuring smooth thread engagement. 3. Tighten the screw to the required torque specification for the application, utilizing the 304 stainless steel's inherent strength.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M13 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M13 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using an undersized or worn tool, leading to head stripping. | Always use a properly sized and well-maintained socket or wrench that fully engages the hex head to prevent damage and ensure optimal torque transfer. |
| Over-tightening, which can lead to thread damage or bolt failure. | Adhere to the recommended torque specifications for the mating components and the load requirements of the application to avoid overstressing the fastener. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Structural assemblies in corrosive environments, Marine hardware and boat building, Outdoor equipment and infrastructure.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||