This M13x88mm hex head cap screw, crafted from superior Titanium Grade 5, offers exceptional strength-to-weight ratio and outstanding corrosion resistance for critical fastening applications.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M13 |
| Length | 88mm |
| Head Width | 11mm |
Manufactured under strict quality controls, this M13x88mm hex head cap screw is precisely engineered from Titanium Grade 5 (Ti-6Al-4V). This alloy provides a tensile strength of approximately 950 MPa, a yield strength of 880 MPa, and excellent fatigue strength, all while maintaining a density significantly lower than steel. The M13 diameter, 88mm length, and 11mm head width ensure robust engagement and load distribution. Its inherent biocompatibility and resistance to chloride corrosion make it ideal for environments ranging from aerospace and marine to medical implants and chemical processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure threads are clean and free of debris. Lubricate threads lightly with a compatible anti-seize compound if necessary. 2. Hand-thread the screw to confirm proper engagement and alignment. 3. Tighten the screw using a calibrated torque wrench to the specified torque value for this grade and diameter, ensuring even pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M13 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M13 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-torquing the titanium screw, leading to thread stripping or fastener failure. | Always use a calibrated torque wrench and consult torque charts specific to Titanium Grade 5 for the M13 size. |
| Using incompatible lubricants or anti-seize compounds that can react with titanium. | Use only lubricants and anti-seize compounds specifically rated for use with titanium alloys. Nickel-based or copper-based compounds are often recommended. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive and motorsport assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||