Engineered for non-corrosive environments, this M13x85mm Nylon Hex Head Cap Screw offers excellent chemical resistance and electrical insulation. Its robust design ensures secure fastening in a wide range of applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M13 |
| Length | 85mm |
| Head Width | 33mm |
Trusted by engineers across multiple sectors, this M13x85mm Nylon Hex Head Cap Screw features a substantial 33mm head width for superior torque distribution. Constructed from high-performance Nylon, it exhibits exceptional dielectric strength, low friction, and resistance to a broad spectrum of chemicals and solvents. Its lightweight nature and non-magnetic properties make it an ideal choice for applications where corrosion or electrical conductivity is a concern, such as in electronics manufacturing, medical equipment, and water treatment facilities. The precise dimensions ensure compatibility with standard M13 tooling and mating components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Insert the M13x85mm Nylon Hex Head Cap Screw and hand-tighten to engage threads. 3. Use appropriate tooling to tighten the screw to the desired torque, avoiding over-tightening to prevent thread stripping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M13 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M13 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, which can strip threads or fracture the fastener. | Apply controlled torque using a calibrated torque wrench, respecting the material's limitations. |
| Using the nylon screw in environments with extreme temperatures or significant mechanical load without proper engineering assessment. | Verify the material's temperature and load specifications against application requirements before deployment. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical Insulation and Components, Corrosion-Resistant Assemblies, Medical Device Manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||