This M13x80mm Nylon Hex Head Cap Screw provides a lightweight, non-conductive fastening solution. Its robust nylon composition ensures resistance to chemicals and corrosion, making it ideal for demanding environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M13 |
| Length | 80mm |
| Head Width | 31mm |
Engineered for reliability and performance, this M13x80mm Nylon Hex Head Cap Screw features a nominal diameter of M13 and a total length of 80mm. The hex head offers a substantial 31mm width for secure torque application. Manufactured from high-grade nylon, it exhibits excellent dielectric strength, low friction, and superior resistance to a wide range of solvents, acids, and alkalis. This makes it an optimal choice for applications where metal fasteners would corrode or interfere with electrical systems. Its inherent flexibility also absorbs vibration, reducing the risk of loosening over time.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating hole or nut for the M13 thread. 2. Insert the cap screw, ensuring it engages cleanly with the receiving thread. 3. Tighten using a suitable wrench, applying consistent torque without over-stressing the nylon material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M13 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M13 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread stripping or material deformation. | Apply torque cautiously, using a torque wrench if precision is required, and stop once snug or at the recommended torque for nylon fasteners. |
| Using in high-temperature environments beyond nylon's operational limit, causing softening and loss of strength. | Verify the application temperature is within the specified operating range for nylon fasteners. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical insulation applications, Chemical processing equipment, Marine and outdoor environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||