Engineered from high-performance nylon, this M13x80mm hex head cap screw offers exceptional corrosion resistance and a lightweight alternative to metal fasteners. Ideal for demanding environments where chemical or moisture exposure is a concern.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Size | M13 |
| Length | 80mm |
| Head Width | 28mm |
Built to exacting engineering tolerances, this M13x80mm hex head cap screw boasts a nominal diameter of M13, an overall length of 80mm, and a head width of 28mm. Crafted from robust nylon, it provides superior dielectric strength, excellent chemical resistance to a wide range of acids, alkalis, and solvents, and a lightweight profile. Its inherent non-conductive properties make it an ideal choice for electrical insulation and applications where galvanic corrosion is a risk. The hex head design facilitates secure torque application with standard tooling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-thread the screw to confirm alignment and prevent cross-threading. 3. Use a calibrated torque wrench to tighten the screw to the specified torque value for nylon fasteners, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M13 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M13 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, which can lead to thread stripping or head deformation. | Utilize a torque wrench set to the manufacturer's recommended torque specification for nylon fasteners. |
| Using in applications exceeding the material's temperature or tensile strength limits. | Verify the operating temperature and load requirements against the nylon's material properties before deployment. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical insulation and component mounting, Chemical processing equipment, Marine and outdoor environments with high corrosion potential.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||