Engineered for reliability, these M13x69mm Nylon Hex Head Cap Screws offer exceptional chemical resistance and electrical insulation. Ideal for corrosive environments and applications requiring non-conductivity.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M13 |
| Length | 69mm |
| Head Width | 13mm |
Designed for demanding industrial environments, this M13x69mm Hex Head Cap Screw is manufactured from high-performance nylon, providing superior tensile strength and resistance to solvents, acids, and alkalis. The M13 nominal size and 69mm length ensure robust engagement, while the 13mm head width allows for secure tightening with standard tooling. This material choice eliminates concerns about galvanic corrosion and reduces overall component weight, making it suitable for sensitive electronic assemblies and chemical processing equipment where metal fasteners would be detrimental.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating component with a pre-tapped hole or nut. 2. Insert the M13x69mm Nylon Hex Head Cap Screw into the assembly. 3. Tighten using a suitable hex wrench until snug, avoiding over-tightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M13 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M13 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using metal tools that can damage the nylon head. | Utilize nylon or plastic-tipped tools to prevent scratching or deforming the hex head. |
| Over-tightening the screw, leading to thread stripping or head fracture. | Tighten only until snug. For applications requiring specific torque values, consult material specifications and use a calibrated torque wrench for nylon. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Chemical Processing Equipment, Electrical Enclosures and Assemblies, Corrosive Environment Applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||