Engineered for robust assembly in challenging conditions, this M13x64mm hex head cap screw is crafted from corrosion-resistant Aluminum 6061, offering exceptional strength and lightness.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M13 |
| Length | 64mm |
| Head Width | 34mm |
Designed for demanding industrial environments, this M13x64mm hex head cap screw features a substantial 34mm head width for superior torque application and load distribution. Constructed from Aluminum 6061, it provides an excellent balance of high tensile strength (approximately 310 MPa) and low density (2.7 g/cm³), making it ideal for applications where weight reduction is critical without compromising structural integrity. Its excellent corrosion resistance ensures longevity in diverse atmospheric and chemical exposures. This fastener is suited for aerospace, automotive, marine, and high-performance equipment manufacturing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Insert the screw by hand to verify thread engagement. 3. Tighten the screw to the specified torque using an appropriate wrench, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M13 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M13 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using an undersized wrench, leading to cam-out and potential thread damage. | Utilize a wrench that precisely fits the 34mm hex head to ensure maximum contact and control. |
| Over-tightening, which can strip threads or deform the mating material. | Adhere to the manufacturer's recommended torque specifications for Aluminum 6061 fasteners to prevent damage. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Automotive chassis and body assembly, Marine hardware and fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||