Engineered for superior performance, this M13x55mm polycarbonate hex head cap screw offers exceptional strength and chemical resistance. Its lightweight, non-conductive properties make it ideal for specialized assemblies.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Size | M13 |
| Length | 55mm |
| Head Width | 29mm |
Specified by design engineers worldwide, this M13x55mm hex head cap screw is manufactured from high-performance polycarbonate, delivering excellent impact resistance and a wide operating temperature range. The M13 thread diameter and 55mm length ensure robust mechanical fastening, while the 29mm head width provides ample surface area for torque application. Its inherent dielectric strength and corrosion immunity make it a superior choice for environments where metal fasteners may degrade or interfere with electrical signals.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate M13 tapped hole or nut. 2. Insert the M13x55mm polycarbonate hex head cap screw into the assembly. 3. Engage the hex head with a compatible tool and tighten to the specified torque, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M13 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M13 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the polycarbonate screw, which can lead to material deformation or cracking. | Utilize a torque wrench set to the manufacturer's recommended torque value for polycarbonate fasteners. |
| Using metallic tools that can potentially scratch or damage the polycarbonate surface. | Employ tools with non-marring surfaces or ensure careful handling during installation. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosure assemblies, Medical equipment manufacturing, Corrosive chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||