This M13x14mm Hex Head Cap Screw, fabricated from robust Aluminum 6061, offers exceptional strength-to-weight ratio and superior corrosion resistance for critical fastening needs.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M13 |
| Length | 14mm |
| Head Width | 30mm |
Engineered for reliability and performance, this M13x14mm Hex Head Cap Screw is manufactured from premium Aluminum 6061 alloy, renowned for its excellent weldability, machinability, and moderate to high strength. The material's inherent corrosion resistance makes it ideal for environments where rust and galvanic corrosion are concerns. Its precise M13 thread pitch and 14mm length, coupled with a substantial 30mm head width for optimal torque application and load distribution, ensure secure and stable joints in various industrial and structural applications. The alloy's characteristic properties allow for efficient material removal during manufacturing, contributing to cost-effectiveness without compromising structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-thread the cap screw to verify alignment and prevent cross-threading. 3. Tighten the cap screw to the specified torque using an appropriate wrench, ensuring even pressure is applied.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M13 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M13 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, leading to thread stripping or material deformation. | Utilize a calibrated torque wrench and adhere to the manufacturer's recommended torque specifications for Aluminum 6061. |
| Using incorrect tools that damage the hex head, hindering proper tightening or removal. | Employ a properly sized hex socket or wrench that fits snugly to avoid cam-out and damage. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace components requiring lightweight yet strong fasteners., Marine hardware and structures exposed to corrosive saltwater environments., High-performance automotive and motorsport assemblies..
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||