This M13x101mm Hex Head Cap Screw, crafted from premium 304 stainless steel, offers exceptional strength and corrosion resistance. Engineered for reliability in challenging environments, it ensures secure and long-lasting connections.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Size | M13 |
| Length | 101mm |
| Head Width | 10mm |
A high-performance industrial component, this M13x101mm Hex Head Cap Screw is manufactured from robust 304 stainless steel, renowned for its excellent tensile strength and superior resistance to oxidation and corrosion in a wide range of environments. The metric M13 thread provides a substantial load-bearing capacity, while the 101mm length allows for fastening through thicker materials. The 10mm head width ensures compatibility with standard tooling for efficient installation and removal. Its material composition makes it ideal for use in marine, chemical processing, food and beverage, and outdoor applications where durability and hygiene are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench or socket size (10mm) for the hex head. 2. Ensure the mating threads are clean and free from debris. 3. Thread the cap screw into the designated hole by hand to confirm alignment and prevent cross-threading. 4. Tighten the cap screw to the recommended torque specification for the material and application using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M13 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M13 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size wrench, leading to stripped hex heads. | Always use the correct 10mm wrench or socket for the hex head to ensure proper engagement and prevent damage. |
| Over-tightening the screw, which can lead to thread damage or component fracture. | Utilize a torque wrench and adhere to the specified torque values for the application to avoid over-stressing the fastener and mating components. |
| Cross-threading the screw during installation, damaging both the screw and the tapped hole. | Start threading the screw by hand to verify proper alignment before applying any torque. If resistance is felt, back out and re-align. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Structural assembly in corrosive environments, Marine and offshore equipment, Food processing machinery and piping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||