Engineered for demanding environments, this M13x100mm Hex Head Cap Screw boasts exceptional polycarbonate strength. Offering corrosion resistance and electrical insulation, it's ideal for critical assembly.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Size | M13 |
| Length | 100mm |
| Head Width | 13mm |
A high-performance industrial component, this M13x100mm Hex Head Cap Screw is manufactured from robust, impact-resistant polycarbonate. With a nominal head width of 13mm and a length of 100mm, it provides superior tensile strength and chemical inertness compared to traditional metal fasteners in corrosive or electrically sensitive applications. The material's inherent dielectric properties make it suitable for use in environments where electrical conductivity is a concern. Its lightweight nature further enhances ease of handling and reduces overall assembly weight.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces and the threaded hole to ensure a debris-free engagement. 2. Insert the Hex Head Cap Screw, ensuring proper alignment with the tapped hole or nut. 3. Tighten the screw using an appropriate hex driver or wrench to the recommended torque specification for polycarbonate fasteners to avoid over-stressing the material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M13 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M13 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, leading to thread stripping or material fracture. | Utilize a torque wrench set to the manufacturer's recommended torque for polycarbonate fasteners. Avoid excessive force. |
| Using the wrong type of driver, potentially damaging the hex head recess. | Employ a properly sized and conditioned hex driver or wrench that fits snugly into the head recess. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Chemical processing equipment assembly, Electrical enclosure fastening, Medical device construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||