Engineered from premium Aluminum 6061, this M13 x 32mm hex head cap screw offers exceptional strength-to-weight ratio and corrosion resistance, ideal for critical fastening in diverse industrial environments.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Size | M13 |
| Length | 32mm |
| Head Width | 8mm |
Built to exacting engineering tolerances, this M13 x 32mm hex head cap screw is manufactured from Aluminum 6061, a precipitation-hardened alloy known for its excellent strength, corrosion resistance, and weldability. The M13 nominal diameter provides significant tensile and shear strength, while the 32mm length offers versatile application reach. The 8mm head width ensures compatibility with standard tooling, facilitating secure and controlled assembly. This fastener is ideally suited for applications where weight reduction without compromising structural integrity is paramount, such as in aerospace, automotive, and marine components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces and the screw threads to remove any debris or contaminants. 2. Apply a suitable thread locking compound if required for vibration resistance. 3. Insert the screw into the designated hole and tighten to the recommended torque specification using an appropriate wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M13 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M13 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive torque, which can strip threads or deform the workpiece. | Always consult torque charts for Aluminum 6061 fasteners and use a calibrated torque wrench. |
| Not ensuring thread engagement is sufficient for the application's load requirements. | Ensure at least 1.5 to 2 full threads are engaged for reliable fastening. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Automotive chassis and powertrain, Marine equipment and fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||