This M13 x 27mm Hex Head Cap Screw, crafted from high-strength polycarbonate, offers exceptional corrosion resistance and electrical insulation. Its lightweight design makes it ideal for applications where weight reduction is critical.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Size | M13 |
| Length | 27mm |
| Head Width | 11mm |
Built to exacting engineering tolerances, this M13 x 27mm Hex Head Cap Screw features a nominal diameter of 13mm and a length of 27mm. The hexagonal head has a measured width of 11mm, designed for standard M13 tooling. Manufactured from robust polycarbonate, this fastener exhibits excellent impact strength, good chemical resistance, and non-conductive properties, making it suitable for environments where metal fasteners would corrode or create electrical hazards. Its precise dimensions ensure reliable and consistent performance in assembly.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate M13 tool for engagement with the hex head. 2. Thread the screw into the mating component, applying steady, controlled torque. 3. Tighten until snug, avoiding overtightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M13 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M13 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the polycarbonate screw, leading to thread stripping or head cracking. | Apply torque conservatively, using a torque wrench if precise control is required, and stop when the screw feels snug. |
| Using metal tools that may scratch or damage the polycarbonate surface. | Utilize plastic or coated tools where possible, or exercise extreme care to avoid marring the fastener's finish. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and equipment, Medical device assembly, Corrosive chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||