Engineered for extreme environments, this M13 x 116mm Hex Head Cap Screw is forged from high-performance Titanium Grade 5. Its superior strength-to-weight ratio and exceptional corrosion resistance make it ideal for critical industrial applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Size | M13 |
| Length | 116mm |
| Head Width | 22mm |
A proven choice for industrial professionals, this M13 x 116mm Hex Head Cap Screw boasts a nominal diameter of M13 and a substantial length of 116mm, ensuring secure engagement in robust assemblies. Manufactured from Titanium Grade 5 (Ti-6Al-4V), it offers an exceptional combination of high tensile strength (up to 950 MPa), low density, and outstanding resistance to pitting and crevice corrosion in aggressive chemical and saltwater environments. The 22mm head width provides ample surface area for torque application with standard tooling, facilitating reliable and secure fastening in applications demanding both structural integrity and weight optimization.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mating surfaces to ensure optimal thread engagement. 2. Apply appropriate thread lubricant or anti-seize compound, if recommended for the specific application. 3. Thread the M13 x 116mm Titanium Grade 5 Hex Head Cap Screw into the pre-tapped hole or mating component, ensuring smooth initial engagement. 4. Tighten the screw to the specified torque using a calibrated torque wrench, observing the recommended torque values for Titanium Grade 5 fasteners.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M13 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M13 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening Titanium screws, which can lead to galling or thread stripping. | Always use a calibrated torque wrench and adhere to recommended torque specifications for Titanium Grade 5 fasteners. Avoid excessive force. |
| Using standard steel tools without proper care, potentially damaging the Titanium surface. | Utilize appropriate, clean tooling designed for Titanium fasteners. Inspect tools for burrs or damage before use. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical equipment, Marine hardware and subsea equipment, High-performance automotive and motorsport applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||