This M13 x 102mm Hex Head Cap Screw, crafted from premium Titanium Grade 5, offers exceptional strength-to-weight ratio and superior corrosion resistance for critical fastening applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Passivated |
| Grade | N/A |
| Size | M13 |
| Length | 102mm |
| Head Width | 27mm |
Manufactured under strict quality controls, this M13 x 102mm Hex Head Cap Screw is engineered from Titanium Grade 5 (Ti-6Al-4V), a dual-phase alloy renowned for its excellent mechanical properties and biocompatibility. Exhibiting a minimum tensile strength of 895 MPa and a yield strength of 827 MPa, it provides robust performance in extreme environments. The 27mm head width ensures ample torque application for secure fastening. Its inherent resistance to chloride-induced corrosion makes it ideal for marine, chemical processing, and aerospace sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean threads of both the screw and the mating component. 2. Apply a small amount of anti-seize compound to the threads if required by the application. 3. Hand-thread the screw into the mating component until snug, then use a calibrated torque wrench to tighten to the specified torque value for the application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M13 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M13 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening can lead to thread stripping or fastener fatigue. | Always adhere to the manufacturer's recommended torque specifications and utilize a calibrated torque wrench. |
| Using incompatible lubricants or thread lockers can degrade titanium's properties or cause galling. | Consult material compatibility charts or product documentation for approved thread lubricants and locking compounds. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive assemblies, Marine and offshore equipment, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||