This M13 x 102mm Hex Head Cap Screw, crafted from superior 304 stainless steel, offers exceptional corrosion resistance and robust mechanical performance for critical fastening needs.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Size | M13 |
| Length | 102mm |
| Head Width | 12mm |
Specified by design engineers worldwide, this M13 x 102mm hex head cap screw is manufactured from premium 304 stainless steel, renowned for its excellent corrosion resistance, including against many chemicals and saltwater. The material offers a good balance of strength and ductility, making it suitable for a wide range of operating temperatures. With a nominal diameter of M13, a length of 102mm, and a head width of 12mm, this fastener conforms to stringent industrial standards for thread pitch and dimensional accuracy, ensuring reliable torque-tension relationships and secure joint integrity in demanding environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the screw threads and the receiving tapped hole or nut. 2. Apply appropriate lubricant or anti-seize compound if recommended for the application. 3. Thread the cap screw into the assembly until finger-tight, then use a calibrated torque wrench to tighten to the specified torque value.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M13 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M13 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, leading to thread stripping or fastener failure. | Always use a calibrated torque wrench and adhere to the manufacturer's recommended torque specifications for the fastener and mating components. |
| Using the wrong thread pitch or diameter for the application. | Verify the exact M13 thread specification and ensure it matches the tapped hole or nut being used. Consult engineering drawings for precise requirements. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Marine hardware and equipment, Chemical processing equipment, Food processing machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||