This M12 x 93mm Hex Head Cap Screw, crafted from robust Aluminum 6061, offers superior corrosion resistance and a lightweight profile. Engineered for demanding industrial environments.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Size | M12 |
| Length | 93mm |
| Head Width | 32mm |
A high-performance industrial component, this M12 x 93mm Hex Head Cap Screw is manufactured from Aluminum 6061, a precipitation-hardened alloy renowned for its excellent strength-to-weight ratio, good corrosion resistance, and weldability. The nominal diameter is M12, with a total length of 93mm, and a head width of 32mm, ensuring ample surface area for torque application and secure fastening. Its precise dimensions and material properties make it suitable for applications where weight reduction and resistance to environmental degradation are critical, such as in automotive, aerospace, marine, and architectural structures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Hand-tighten the screw to engage the threads properly. 3. Use an appropriate wrench or socket to tighten to the specified torque, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M12 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M12 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force, leading to stripped threads or fastener failure. | Always adhere to the recommended torque specifications for Aluminum 6061 fasteners, utilizing a torque wrench for accuracy. |
| Not verifying thread compatibility between the screw and the mating component. | Confirm that the M12 thread pitch of the screw matches the intended receptacle to prevent cross-threading or binding. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Marine equipment and fixtures, Lightweight automotive assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||