This M12x88mm brass hex head cap screw provides superior corrosion resistance and a visually appealing finish. Its non-magnetic properties and good electrical conductivity make it suitable for diverse industrial and decorative applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M12 |
| Length | 88mm |
| Head Width | 25mm |
Manufactured under strict quality controls, this M12x88mm brass hex head cap screw features a nominal diameter of M12 and a length of 88mm. The head width measures 25mm, ensuring robust load distribution. Composed of high-grade brass (typically UNS C36000 or equivalent), it exhibits excellent machinability, moderate strength, and exceptional resistance to corrosion, particularly in environments prone to moisture or mild chemicals. The material's inherent non-magnetic nature and good electrical conductivity further enhance its utility in specific electrical and electronic assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate torque wrench and socket size (25mm or appropriate for M12 hex head). 2. Ensure mating threads are clean and free of debris. 3. Apply the screw using steady, even pressure, tightening to the required torque specification for brass fasteners.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M12 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M12 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening brass fasteners, which can lead to thread stripping or material deformation. | Adhere to recommended torque specifications for brass fasteners and utilize a torque wrench for precise application. |
| Using in high-stress structural applications where steel or stainless steel would be more appropriate due to lower tensile strength. | Verify material suitability based on load requirements. Brass is best for moderate load and corrosion-critical applications. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings (non-critical), Electrical connectors and enclosures, Decorative architectural elements, Plumbing fixtures, Musical instrument construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||