This Hex Head Cap Screw, crafted from robust Titanium Grade 5, offers exceptional strength-to-weight ratio and superior corrosion resistance. Ideal for critical fastening in demanding environments.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Size | M12 |
| Length | 54mm |
| Head Width | 12mm |
A high-performance industrial component, this M12 x 54mm Hex Head Cap Screw is engineered from Titanium Grade 5 (Ti-6Al-4V). This alloy provides an outstanding combination of high strength (tensile strength typically exceeding 900 MPa) and excellent corrosion resistance in aggressive chemical and saltwater environments, while maintaining a significantly lower density than steel alloys. The nominal head width of 12mm ensures compatibility with standard M12 tooling, facilitating efficient assembly. Its precise dimensional tolerances ensure reliable engagement and torque transfer, making it suitable for aerospace, marine, chemical processing, and high-performance automotive applications where weight reduction and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply a suitable lubricant or anti-seize compound to the threads if recommended for the application. 3. Thread the screw into the receiving component by hand until snug. 4. Tighten the screw to the specified torque using a calibrated torque wrench, ensuring the head remains square to the surface.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M12 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M12 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening, leading to thread stripping or fastener failure. | Always use a calibrated torque wrench and adhere to the recommended torque specifications for the material and application. |
| Using the wrong tool size, which can damage the head or lead to an insecure fit. | Utilize a correctly sized metric socket or wrench that fully engages the hex head to prevent slippage and damage. |
| Not cleaning mating threads, which can impede proper engagement and torque application. | Thoroughly inspect and clean both the screw threads and the receiving threads before installation to ensure smooth and accurate fastening. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Marine equipment and fittings, Chemical processing plant assemblies, High-performance automotive and motorsport applications, Medical device manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||