This M12x37mm Hex Head Cap Screw, crafted from robust Aluminum 6061, provides exceptional corrosion resistance and a high strength-to-weight ratio for critical fastening needs.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Size | M12 |
| Length | 37mm |
| Head Width | 19mm |
A high-performance industrial component, this M12x37mm Hex Head Cap Screw is manufactured from Aluminum alloy 6061, renowned for its excellent corrosion resistance, good machinability, and moderate strength. The M12 nominal diameter, coupled with a 37mm length, ensures precise fitment in a variety of assemblies. The 19mm hex head width provides ample surface area for torque application, facilitating secure tightening. This material composition makes it ideal for environments where galvanic corrosion is a concern, and its lightweight nature contributes to overall assembly efficiency. Typical applications leverage its non-magnetic properties and resistance to environmental degradation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Apply appropriate lubricant if specified by application requirements. 3. Tighten the screw to the recommended torque specification using a calibrated wrench, ensuring the hex head is fully engaged.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M12 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M12 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, which can strip threads or deform the mating surface. | Utilize a torque wrench and adhere to the manufacturer's or engineering specifications for the correct torque value. |
| Using the wrong tool for tightening, leading to damaged hex head or incomplete torque application. | Employ a properly sized socket or wrench that fits the 19mm hex head snugly. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace component assembly, Marine hardware, Automotive structural connections, Electrical enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||