Precision-manufactured M12x36mm Hex Head Cap Screws from Aluminum 6061 deliver exceptional corrosion resistance and a lightweight yet robust fastening solution for diverse industrial and aerospace applications.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Size | M12 |
| Length | 36mm |
| Head Width | 18mm |
Engineered for reliability and performance, these M12x36mm Hex Head Cap Screws are fabricated from high-strength Aluminum 6061 alloy, renowned for its excellent corrosion resistance, weldability, and moderate strength-to-weight ratio. The M12 nominal diameter, 36mm length, and 18mm head width conform to strict dimensional tolerances for consistent engagement with mating components. This material is ideal for environments prone to galvanic corrosion and applications where weight reduction is a critical design parameter, ensuring long-term structural integrity and operational efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-thread the screw to confirm proper engagement and alignment. 3. Tighten to the specified torque using an appropriate wrench, avoiding over-tightening to prevent thread stripping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M12 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M12 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force, leading to thread damage or component deformation. | Consult torque specifications for the application and utilize a calibrated torque wrench. |
| Mating with incompatible thread sizes or pitches. | Verify that the screw's M12 thread specification matches the receiving component precisely. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Marine hardware, Lightweight automotive assemblies, Corrosion-resistant equipment frames.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||