Engineered from high-strength Aluminum 6061, this M12x141mm hex head cap screw offers exceptional corrosion resistance and a lightweight profile, ideal for critical structural and assembly applications.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M12 |
| Length | 141mm |
| Head Width | 35mm |
Precision-manufactured to tight tolerances, this M12x141mm hex head cap screw is fabricated from Aluminum 6061-T6 alloy, renowned for its excellent strength-to-weight ratio and superior corrosion resistance. The M12 nominal diameter ensures robust load-bearing capacity, while the 141mm length provides ample grip for varied assembly depths. The 35mm hex head width allows for secure engagement with standard tooling, facilitating efficient installation and disassembly. This specification is critical for applications demanding reliable fastening in environments where weight reduction and resistance to environmental degradation are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply appropriate lubricant if recommended for the application to prevent galling. 3. Tighten the hex head cap screw to the manufacturer-specified torque using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M12 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M12 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the aluminum screw, leading to thread stripping or deformation of the mating material. | Always use a calibrated torque wrench and adhere to the torque specifications for Aluminum 6061 fasteners in the specific application. |
| Using excessive force with improper tooling, potentially damaging the hex head or the tool. | Utilize the correct size and type of wrench or socket for the 35mm hex head to ensure proper engagement and prevent damage. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Automotive lightweight assemblies, Marine equipment and fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||