This M12 x 100mm Hex Head Cap Screw, crafted from high-strength Aluminum 6061, offers superior corrosion resistance and a lightweight profile for critical industrial assemblies.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Size | M12 |
| Length | 100mm |
| Head Width | 29mm |
Manufactured under strict quality controls, this M12 x 100mm Hex Head Cap Screw features a nominal diameter of 12mm and a length of 100mm. The head boasts a nominal width of 29mm for robust engagement. Constructed from Aluminum 6061, it delivers an excellent strength-to-weight ratio, good machinability, and superior resistance to corrosion, making it ideal for aerospace, marine, and automotive sectors where performance and durability are paramount. Compliant with relevant industry standards for precise fitment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the screw threads and the mating tapped hole or nut to remove any debris. 2. Apply a small amount of anti-seize compound to the threads, if recommended for the specific application. 3. Insert the screw and tighten to the specified torque using an appropriate wrench, ensuring the head is seated flush.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M12 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M12 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the aluminum screw, which can strip the threads or deform the mating material. | Always use a torque wrench and adhere to the manufacturer's recommended torque specifications for Aluminum 6061 fasteners. |
| Using the wrong size wrench, leading to damage to the hex head and potentially incomplete tightening. | Ensure the wrench size precisely matches the 29mm head width of the cap screw for optimal engagement and force transfer. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace structural components, Marine hardware and fittings, Automotive chassis and body assembly.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||