Engineered from aerospace-grade Titanium Grade 5, this M12 x 94mm hex head cap screw offers exceptional strength-to-weight ratio and superior corrosion resistance, ideal for critical fastening solutions.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Size | M12 |
| Length | 94mm |
| Head Width | 32mm |
Trusted by engineers across multiple sectors, this M12 x 94mm Hex Head Cap Screw is manufactured from Titanium Grade 5 (Ti-6Al-4V), renowned for its high tensile strength (950 MPa min), fatigue strength, and excellent corrosion resistance in aggressive environments. The precise M12 thread pitch ensures secure engagement, while the 32mm hex head width allows for robust torque application with standard tooling. This fastener is engineered for applications demanding lightweight strength and long-term durability, from aerospace and medical implants to high-performance automotive and marine systems where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating thread is clean and free of debris. 2. Hand-thread the cap screw to confirm proper alignment and avoid cross-threading. 3. Use a calibrated torque wrench to tighten the cap screw to the manufacturer's specified torque value, considering any lubricant used.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M12 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M12 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the fastener, leading to thread stripping or material fatigue. | Always use a calibrated torque wrench and adhere to recommended torque specifications for Titanium Grade 5 fasteners. |
| Using incompatible tools or applying excessive force, potentially damaging the hex head or the tool. | Utilize properly sized, high-quality sockets or wrenches to engage the hex head fully and ensure even pressure distribution. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive engine and chassis applications, Marine hardware and offshore structures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||