This M12 x 92mm Nylon Hex Head Cap Screw offers superior corrosion resistance and electrical insulation. Its lightweight, non-magnetic properties make it ideal for specialized applications where traditional metal fasteners are unsuitable.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Size | M12 |
| Length | 92mm |
| Head Width | 14mm |
Engineered for reliability and performance, this M12 x 92mm Hex Head Cap Screw is manufactured from high-grade nylon, offering excellent chemical resistance and dielectric strength. The M12 thread size provides robust joining capabilities, while the 92mm length ensures ample engagement for various assemblies. The 14mm head width allows for standard tooling, facilitating efficient installation. Its non-metallic composition makes it immune to galvanic corrosion and ideal for environments exposed to moisture, corrosive chemicals, or electrical fields. This fastener is designed for applications demanding lightweight, non-magnetic, and electrically insulating solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select appropriate tooling for the 14mm hex head. 2. Thread the M12 screw into the pre-tapped hole or nut, ensuring smooth engagement. 3. Tighten to the recommended torque for nylon fasteners, avoiding over-tightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M12 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M12 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread stripping or head deformation. | Use a torque wrench set to the manufacturer's recommended torque specification for nylon fasteners or tighten by hand until snug and then a quarter turn. |
| Using metal tools that can scratch or damage the nylon surface. | Utilize tools with plastic or coated heads, or ensure careful handling to maintain the integrity of the nylon surface. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical equipment assembly, Chemical processing environments, Lightweight structural components, Medical device manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||