Engineered for robust performance, this M12 x 88mm polycarbonate hex head cap screw offers exceptional strength and resistance to corrosive elements, ideal for demanding industrial and structural applications requiring reliable fastening.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Size | M12 |
| Length | 88mm |
| Head Width | 36mm |
Purpose-built for heavy-duty applications, this M12 x 88mm hex head cap screw is manufactured from high-performance polycarbonate, providing superior tensile strength, excellent dielectric properties, and significant resistance to a wide range of chemicals and UV degradation. The M12 thread designation ensures compatibility with standard metric fasteners, while the 88mm length and 36mm head width facilitate secure and stable assembly in structural components, electrical enclosures, and marine environments. Its inherent toughness and impact resistance make it a preferred choice where metal fasteners may corrode or conduct electricity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Hand-tighten the screw to seat the threads. 3. Use a calibrated torque wrench to tighten to the recommended specification for polycarbonate fasteners, typically lower than metal equivalents, to avoid over-stressing the material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M12 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M12 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the screw, which can strip the polycarbonate threads or fracture the head. | Always use a torque wrench set to the manufacturer's recommended torque value for polycarbonate fasteners. Consult material datasheets for specific torque limits. |
| Using metal tools that can scratch or damage the polycarbonate surface, potentially compromising its integrity. | Utilize tools specifically designed for plastic fasteners or ensure a protective layer is used between the tool and the screw head. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and control panels, Marine and offshore equipment, Chemical processing equipment, Corrosive environments requiring non-conductive fasteners.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||