Engineered for demanding applications, this M12 x 67mm Nylon Hex Head Cap Screw offers superior corrosion resistance and electrical insulation. Its robust nylon construction ensures reliability in harsh environments where metal fasteners may degrade.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M12 |
| Length | 67mm |
| Head Width | 17mm |
A high-performance industrial component, this M12 x 67mm Nylon Hex Head Cap Screw is manufactured from advanced engineering-grade nylon. It exhibits excellent tensile strength for its weight, exceptional resistance to a wide range of chemicals and solvents, and a low coefficient of friction. The M12 thread size ensures compatibility with standard metric fastening systems, while the 67mm length provides ample engagement. The 17mm hex head offers a secure grip for installation and removal using standard tooling, making it ideal for applications requiring non-magnetic properties or where galvanic corrosion is a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating component with a tapped hole or nut designed for M12 threads. 2. Insert the Hex Head Cap Screw through the assembly. 3. Tighten the screw using a suitable wrench on the 17mm hex head until the desired clamping force is achieved, avoiding over-tightening which can damage the nylon. 4. For critical applications, verify torque specifications and consider the material's thermal expansion characteristics.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M12 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M12 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread stripping or deformation. | Use a torque wrench to adhere to specified torque values. If precise values are not available, tighten until snug and then an additional quarter turn, monitoring for any resistance. |
| Using the nylon screw in applications exceeding its temperature or load-bearing limits. | Consult the nylon's material data sheet for its operational temperature range and tensile strength. Select a fastener appropriate for the expected environmental conditions and mechanical stress. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and panel mounting, Corrosive chemical processing equipment, Automotive and aerospace components requiring lightweight fasteners.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||