High-strength M12 x 53mm hex head cap screws crafted from corrosion-resistant Aluminum 6061. Engineered for reliable joining in diverse industrial settings, offering a lightweight yet robust fastening solution.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Size | M12 |
| Length | 53mm |
| Head Width | 10mm |
Designed for demanding industrial environments, these M12 x 53mm hex head cap screws are manufactured from Aluminum 6061, renowned for its excellent strength-to-weight ratio and superior corrosion resistance. The M12 nominal diameter, coupled with a 53mm length and a 10mm hex head width, ensures compatibility with standard tooling and provides ample clamping force for secure connections. This material choice is ideal for applications where weight reduction is critical or exposure to corrosive elements is a concern, such as in aerospace, marine, and general manufacturing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating component with a pre-tapped hole or clearance hole for a nut. 2. Insert the M12 x 53mm hex head cap screw through the assembled components. 3. Tighten the screw using a 10mm hex socket wrench or driver to the specified torque value, ensuring a secure connection without over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M12 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M12 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during tightening, leading to thread stripping or material deformation. | Always adhere to recommended torque specifications for Aluminum 6061 fasteners to prevent damage and ensure joint integrity. |
| Employing incorrect tooling, such as an imperial-sized wrench on a metric fastener. | Utilize a 10mm hex socket or driver to ensure a proper fit and prevent cam-out or rounding of the hex head. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace component assembly, Marine equipment fastening, Lightweight structural framing, Corrosion-prone environment applications, General industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||