Engineered for superior performance, this M12 x 30mm Hex Head Cap Screw, crafted from Titanium Grade 5, offers exceptional strength-to-weight ratio and unmatched corrosion resistance for critical fastening needs.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Size | M12 |
| Length | 30mm |
| Head Width | 13mm |
Specified by design engineers worldwide, this M12 x 30mm Hex Head Cap Screw is manufactured from Aerospace Grade Titanium (Ti-6Al-4V), commonly known as Grade 5. This alloy provides a minimum tensile strength of 895 MPa and a yield strength of 830 MPa, ensuring exceptional load-bearing capacity. Its inherent biocompatibility and resistance to galvanic corrosion make it ideal for marine, medical, and aerospace environments. The M12 thread pitch ensures secure and reliable connections, while the 30mm length and 13mm head width conform to industry-standard dimensions for broad compatibility.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Apply appropriate thread lubricant or anti-seize compound if required by the application's environmental conditions. 3. Tighten the cap screw to the specified torque using a calibrated torque wrench. Avoid over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M12 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M12 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel tools which can gall titanium threads. | Utilize tools designed for titanium or coated fasteners to prevent galling. |
| Applying excessive torque, leading to thread stripping or fastener failure. | Always adhere to the manufacturer's or design engineer's specified torque values. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical equipment, High-performance automotive and motorsport assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||