Engineered for exceptional strength and corrosion resistance, this M12 x 18mm Titanium Grade 5 hex head cap screw is a superior choice for critical applications where performance is paramount.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M12 |
| Length | 18mm |
| Head Width | 28mm |
Specified by design engineers worldwide, this M12 x 18mm hex head cap screw is meticulously manufactured from Titanium Grade 5 (Ti-6Al-4V), offering an unparalleled strength-to-weight ratio (tensile strength ~900 MPa) and outstanding resistance to corrosion in aggressive environments. The nominal head width of 28mm ensures optimal torque transfer and load distribution. This fastener is ideal for applications demanding high performance, biocompatibility, and longevity, commonly found in aerospace, medical implants, marine, and high-performance automotive sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Apply appropriate lubricant if specified by the application. 3. Tighten the cap screw to the manufacturer's recommended torque specification using a calibrated torque wrench.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M12 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M12 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-torquing the fastener, leading to thread stripping or material fatigue. | Always adhere to the specified torque values for Titanium Grade 5 fasteners and use a calibrated torque wrench. |
| Using incompatible tools or creating galling during installation due to lack of lubrication. | Utilize appropriate hex drivers for the head size and apply a suitable anti-seize compound or lubricant recommended for titanium. |
A: This Hex Head Cap Screw, Titanium Grade 5 is manufactured from Titanium Grade 5.
A: Aerospace structural components, Medical implants and surgical instruments, High-performance automotive engine and chassis applications, Marine hardware and offshore equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||