Engineered for reliability in corrosive and weight-sensitive applications, this M12 x 134mm Nylon Hex Head Cap Screw offers exceptional chemical resistance and dielectric properties. Its robust nylon construction ensures long-term performance.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M12 |
| Length | 134mm |
| Head Width | 25mm |
Specified by design engineers worldwide, this M12 x 134mm Nylon Hex Head Cap Screw features a nominal diameter of 12mm and a total length of 134mm. The hex head has a controlled width of 25mm for optimal wrench engagement. Constructed from high-performance nylon, it exhibits excellent tensile strength, impact resistance, and a broad operating temperature range. Its inherent non-conductive nature makes it ideal for electrical insulation and preventing galvanic corrosion in dissimilar material assemblies. Compliant with relevant ISO fastening standards, it ensures consistent and predictable performance across a wide spectrum of industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench or socket size (25mm across flats) for the hex head. 2. Thread the screw into the pre-tapped hole or through the mating components, ensuring proper alignment. 3. Tighten the screw to the recommended torque specification for nylon fasteners, avoiding over-tightening to prevent stripping or material damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M12 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M12 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread stripping or head deformation. | Use a torque wrench set to the manufacturer's recommended torque for nylon fasteners. Avoid excessive force. |
| Using standard metal fastener torque values, which are too high for nylon. | Consult engineering specifications or material data sheets for appropriate torque values for nylon. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and equipment, Chemical processing equipment, Marine and offshore applications, Medical devices.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||