This M12 x 110mm brass hex head cap screw provides superior corrosion resistance and non-sparking characteristics, making it ideal for demanding environments. Engineered for reliable fastening and joining.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Size | M12 |
| Length | 110mm |
| Head Width | 23mm |
Manufactured under strict quality controls, this M12 x 110mm hex head cap screw is forged from high-grade brass, a material renowned for its excellent corrosion resistance, particularly in marine and chemical applications. The metric M12 thread ensures compatibility with standard metric nuts and tapped holes. With a nominal length of 110mm and a substantial 23mm head width, it provides ample bearing surface for secure torque application and load distribution. Brass's inherent non-magnetic and non-sparking properties make it suitable for hazardous environments where ignition sources must be minimized.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Apply a small amount of anti-seize compound if required for the application environment. 3. Insert the cap screw into the intended hole and engage the threads. 4. Tighten the cap screw to the recommended torque specification using an appropriate wrench on the hex head.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M12 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M12 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening, leading to thread stripping or fastener deformation. | Utilize a torque wrench and adhere to the specified torque values for the M12 thread size and material. |
| Using the wrong size wrench, potentially damaging the hex head or slipping. | Employ a 23mm wrench, or the correct size for the hex head width, to ensure a secure grip and prevent damage. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine hardware and fittings, Chemical processing equipment, Electrical grounding applications, Food processing machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||