This M12 x 106mm Hex Head Cap Screw, crafted from durable Aluminum 6061, offers superior corrosion resistance and a lightweight design for critical fastening in demanding environments.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Size | M12 |
| Length | 106mm |
| Head Width | 33mm |
Engineered for reliability and performance, this M12 x 106mm Hex Head Cap Screw is manufactured from Aluminum 6061, a precipitation-hardening alloy known for its excellent strength-to-weight ratio, moderate corrosion resistance, and good machinability. The substantial 33mm head width ensures secure torque application and distributes load effectively, preventing damage to mating surfaces. Ideal for applications where weight reduction is paramount without compromising structural integrity, such as in aerospace, automotive sub-assemblies, and marine environments. Its non-magnetic properties also make it suitable for sensitive electronic enclosures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Hand-thread the screw to confirm proper engagement and alignment. 3. Using a calibrated torque wrench, tighten the screw to the manufacturer's specified torque for Aluminum 6061 fasteners, ensuring not to exceed the material's yield strength.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M12 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M12 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening, leading to thread stripping or material yielding. | Always use a calibrated torque wrench and adhere to recommended torque specifications for Aluminum 6061. |
| Using the wrong size wrench, which can round the hex head. | Utilize the correct size wrench, matching the 33mm head width precisely. |
A: This Hex Head Cap Screw, Aluminum 6061 is manufactured from Aluminum 6061.
A: Aerospace components, Automotive sub-assemblies, Marine equipment, Lightweight structural bracing, Electrical enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||