This M12 x 101mm Nylon Hex Head Cap Screw offers superior corrosion resistance and electrical insulation. Its lightweight yet robust design makes it an ideal fastener for demanding environments where traditional metal fasteners would degrade or conduct electricity.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M12 |
| Length | 101mm |
| Head Width | 13mm |
Trusted by engineers across multiple sectors, this M12 x 101mm Nylon Hex Head Cap Screw (Head Width: 13mm) is manufactured from high-performance polyamide. Its inherent dielectric properties make it indispensable for electrical insulation applications, preventing short circuits and galvanic corrosion. The material exhibits excellent resistance to a broad spectrum of chemicals, acids, and alkalis, ensuring long-term integrity in corrosive industrial settings. Its low coefficient of friction aids in assembly and prevents galling. This fastener is suitable for use in temperature ranges of -40°C to +120°C, offering reliable performance in diverse operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Hand-tighten the screw initially to verify proper thread engagement. 3. Use an appropriately sized wrench or socket (13mm) to tighten the screw to the required torque, avoiding overtightening which can damage the nylon material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M12 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M12 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening, leading to stripped threads or material deformation. | Utilize a torque wrench and adhere to recommended torque specifications for nylon fasteners, which are significantly lower than for metal equivalents. |
| Using in applications exceeding the material's temperature or chemical resistance limits. | Always verify the operating temperature range and chemical compatibility of nylon against the specific environmental conditions of the application. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and panel mounting, Chemical processing equipment, Marine and offshore installations, Medical device assembly.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||