Engineered for superior performance in demanding environments, this M11x96mm hex head cap screw is crafted from high-grade 304 stainless steel. It offers exceptional corrosion resistance and robust mechanical properties for reliable fastening.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Size | M11 |
| Length | 96mm |
| Head Width | 24mm |
A proven choice for industrial professionals, this M11x96mm hex head cap screw boasts a nominal diameter of M11 and a substantial length of 96mm, ensuring deep thread engagement and secure assembly. The head width measures 24mm, providing ample surface area for torque application with standard tooling. Constructed from premium 304 stainless steel, this fastener exhibits excellent resistance to a wide range of corrosive agents, making it ideal for applications exposed to moisture, chemicals, or varying atmospheric conditions. Its inherent tensile strength and durability ensure long-term structural integrity and reliability in critical assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the screw threads and the mating tapped hole or nut to ensure free thread movement. 2. Apply appropriate lubricant if specified for the application to prevent galling and achieve optimal torque. 3. Insert the screw and engage the threads by hand for at least two full turns before applying torque with a wrench to the hex head.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect torque specifications, leading to under-tightening or over-tightening. | Consult engineering drawings or fastener torque charts for the specific application and torque requirements. Use a calibrated torque wrench. |
| Cross-threading the screw by forcing it into the mating threads. | Ensure the screw is started straight and engaged properly before applying rotational force. If resistance is felt, back out and realign. |
A: This Hex Head Cap Screw, 304 Stainless Steel is manufactured from 304 Stainless Steel.
A: Marine and offshore equipment, Food processing machinery, Chemical processing plants, Outdoor structural assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||