Engineered for demanding applications, this M11x83mm Nylon Hex Head Cap Screw offers exceptional corrosion resistance and dielectric properties. Its lightweight design and chemical inertness make it a superior choice for environments where metal fasteners are unsuitable.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Size | M11 |
| Length | 83mm |
| Head Width | 9mm |
Precision-manufactured to tight tolerances, this M11x83mm Nylon Hex Head Cap Screw ensures reliable performance in a variety of assemblies. Constructed from high-strength nylon, it exhibits excellent resistance to a broad spectrum of chemicals, solvents, and moisture, preventing galvanic corrosion and electrical conductivity. The M11 thread size and 83mm length provide substantial engagement, while the 9mm hex head width allows for secure tightening with standard tooling. Its inherent toughness and impact resistance make it suitable for applications subject to vibration or moderate stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free from debris. 2. Thread the M11x83mm Nylon Hex Head Cap Screw into the receiving material by hand for the initial turns to prevent cross-threading. 3. Tighten using an appropriate wrench or socket engaging the 9mm hex head, applying firm but not excessive torque to avoid stripping the nylon threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, leading to thread stripping or head deformation. | Apply only the necessary torque for a secure connection. Consult torque specifications for nylon fasteners if available. |
| Using excessive force when initial threading, resulting in cross-threading and damaged threads. | Always start threading by hand to ensure proper alignment before using tools. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and insulation, Chemical processing equipment, Marine and submersible applications, Food processing machinery, Corrosive industrial environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||