Engineered from high-strength nylon, this M11x76mm Hex Head Cap Screw offers superior corrosion resistance and electrical insulation. Ideal for environments where metal fasteners would degrade or pose a conductivity risk.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Size | M11 |
| Length | 76mm |
| Head Width | 34mm |
Built to exacting engineering tolerances, this M11x76mm Nylon Hex Head Cap Screw features a robust design for reliable performance. The inherent properties of nylon, such as its excellent tensile strength and resistance to chemicals and moisture, make it suitable for diverse operational conditions. Its lightweight nature reduces overall assembly weight, while its non-conductive properties are critical in electrical or sensitive environments. The precisely machined dimensions ensure a secure fit and consistent clamping force when properly torqued.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate tool (e.g., socket wrench or spanner) with a 34mm hex opening. 2. Align the screw with the pre-drilled hole or mating component. 3. Thread the screw by hand until snug, then use the tool to achieve the required torque. 4. Ensure the screw is seated flush against the mating surface.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-torquing the nylon screw, which can lead to stripping or cracking. | Consult torque specifications for nylon fasteners or use a calibrated torque wrench to avoid excessive force. |
| Using a tool with an incorrect hex opening, leading to damage to the screw head. | Verify the tool's hex opening matches the 34mm head width of the screw before application. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical enclosures and control panels, Corrosive chemical processing equipment, Lightweight structural assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||