Engineered for demanding environments, this M11x61mm polycarbonate hex head cap screw offers exceptional strength-to-weight ratio and superior corrosion resistance. Its non-conductive properties make it ideal for electrical applications.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Size | M11 |
| Length | 61mm |
| Head Width | 14mm |
Trusted by engineers across multiple sectors, this M11x61mm hex head cap screw is precision-molded from high-performance polycarbonate. Exhibiting excellent impact strength, UV resistance, and a wide operating temperature range, it provides a durable and lightweight fastening solution. The M11 thread standard ensures compatibility with standard metric components, while the 61mm length and 14mm head width offer ample torque application and secure seating. Ideal for applications requiring non-metallic, electrically insulating fasteners where traditional metal screws are unsuitable due to corrosion or electrical conductivity concerns.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free from debris. 2. Insert the cap screw into the designated hole, engaging the threads. 3. Tighten the screw using an appropriate wrench until snug, avoiding overtightening to prevent damage to the polycarbonate material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening leading to material cracking or stripping of threads. | Apply a controlled torque, using a torque wrench if precision is critical. Refer to material data sheets for recommended torque limits. |
| Using in applications exceeding the material's temperature or load bearing limits. | Verify that the application's environmental conditions and stress requirements are within the specified operating parameters for polycarbonate fasteners. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and panels, Medical equipment assembly, Lightweight structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||