Engineered for demanding environments, this M11x60mm Hex Head Cap Screw boasts exceptional strength and impact resistance, derived from its high-performance Polycarbonate composition. Its corrosion-free nature makes it ideal for corrosive applications.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Size | M11 |
| Length | 60mm |
| Head Width | 12mm |
Specified by design engineers worldwide, this M11x60mm Hex Head Cap Screw features a robust M11 thread pitch and a precisely machined 60mm length, ensuring reliable fastening in critical assemblies. The 12mm head width provides ample bearing surface for secure tightening. Manufactured from high-grade Polycarbonate, it exhibits superior dielectric strength, excellent chemical resistance to many acids and alkalis, and remarkable impact toughness, making it an ideal choice for electrical insulation, medical equipment, and environments prone to corrosion where traditional metal fasteners would degrade.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threads are clean and free of debris. 2. Align the cap screw with the threaded hole and begin threading by hand. 3. Tighten using an appropriate wrench until snug, avoiding overtightening to prevent thread stripping or material damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during tightening. | Tighten the screw until it is snug and provides secure holding power. Polycarbonate has excellent strength, but overtightening can lead to thread deformation or fracture. |
| Not verifying thread compatibility. | Always confirm that the M11 thread specification of the screw precisely matches the M11 tapped hole or nut to prevent cross-threading and ensure proper engagement. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and components, Medical device assemblies, Corrosion-resistant applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||