Engineered for superior performance, this M11x58mm Hex Head Cap Screw features a robust polycarbonate construction, offering excellent chemical resistance and electrical insulation for critical fastening applications.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Size | M11 |
| Length | 58mm |
| Head Width | 27mm |
Trusted by engineers across multiple sectors, this M11x58mm polycarbonate hex head cap screw provides exceptional resistance to corrosion and a high degree of electrical insulation. With a head width of 27mm, it ensures secure load distribution. The inherent toughness and impact resistance of polycarbonate make it suitable for environments where metal fasteners may degrade or pose a safety risk due to conductivity. Its lightweight yet strong design simplifies handling and installation in a variety of industrial assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Thread the M11x58mm polycarbonate hex head cap screw into the designated aperture. 3. Tighten using an appropriate wrench or socket to the recommended torque specification, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the polycarbonate screw, leading to potential cracking or stripping of threads. | Adhere to the manufacturer's specified torque limits for polycarbonate fasteners. Utilize a torque wrench for precise application. |
| Using metal tools that can scratch or damage the polycarbonate surface. | Employ non-marring tools or ensure proper technique to protect the fastener's finish and structural integrity. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and equipment, Chemical processing equipment, Marine and outdoor installations.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||