This M11x54mm Hex Head Cap Screw is precision-engineered from high-performance nylon. Offering excellent corrosion resistance and electrical insulation, it's ideal for applications requiring lightweight, non-metallic fastening solutions.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Size | M11 |
| Length | 54mm |
| Head Width | 29mm |
Manufactured under strict quality controls, this M11x54mm Hex Head Cap Screw features a robust nylon construction, providing superior dielectric strength and resistance to many chemicals and solvents. Its M11 nominal diameter, 54mm length, and a 29mm head width ensure secure and reliable fastening. The material's inherent lightweight properties and non-magnetic nature make it suitable for sensitive electronic assemblies, medical equipment, and corrosive environments where traditional metal fasteners would degrade or interfere.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate mating component with an M11 internal thread. 2. Hand-thread the cap screw into the mating component to ensure proper alignment. 3. Using a suitable wrench for the 29mm hex head, tighten the screw to the required torque, avoiding over-tightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force leading to thread stripping or head deformation | Adhere to recommended torque specifications for nylon fasteners. Hand-tighten initially to confirm thread engagement before applying final torque. |
| Exposing the nylon screw to high temperatures beyond its operational limit | Verify the material's continuous and intermittent use temperature range against the application's thermal conditions. Utilize higher-temperature resistant materials if necessary. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical and electronic enclosures, Corrosive chemical processing equipment, Medical device assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||