Engineered for demanding environments, this M11 x 47mm Nylon Hex Head Cap Screw offers superior corrosion resistance and electrical insulation. Its robust construction ensures reliable performance in diverse industrial settings.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Size | M11 |
| Length | 47mm |
| Head Width | 8mm |
A proven choice for industrial professionals, this M11 x 47mm Nylon Hex Head Cap Screw is manufactured from high-strength, chemically inert nylon. The M11 thread size ensures secure fastening, while the 47mm length provides ample engagement. The 8mm hexagonal head offers a substantial bearing surface for torque application and is compatible with standard hex drivers. Nylon's inherent dielectric properties make it ideal for applications where electrical conductivity must be avoided, and its resistance to moisture and a wide range of chemicals ensures longevity in harsh operating conditions, from food processing to chemical plants.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating threaded hole is clean and free of debris. 2. Hand-thread the cap screw to start, ensuring proper alignment. 3. Use an appropriately sized hex driver to tighten the cap screw to the recommended torque specification for nylon fasteners, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M11 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M11 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the nylon screw, which can strip threads or deform the head. | Use a torque wrench and adhere to recommended torque values for nylon fasteners. Hand-tighten until snug, then apply minimal additional torque. |
| Using the wrong size hex driver, leading to cam-out and damage to the screw head. | Always verify and use the correct 8mm hex driver for the cap screw head. |
A: This Hex Head Cap Screw, Nylon is manufactured from Nylon.
A: Electrical insulation assemblies, Corrosive chemical processing equipment, Lightweight structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||